# Elevate Medical Resources: full website text > The complete text of https://elevatemedicalresources.com/ in one file for AI assistants and search tools. Summary and key facts: https://elevatemedicalresources.com/llms.txt > Last updated: 2026-09-25 # We Turn Failing Medical Practices Back to Profitability. Most billing companies want the easy accounts. We take the practices that are losing money, buried in denials, or falling behind, and we rebuild the billing system underneath them until cashflow is steady and the practice is profitable again. - You work directly with the person doing your billing, not a call center or a rotating team. - We work inside your existing EHR and practice management software. No new systems to learn. - Everything you share is encrypted and handled under HIPAA-compliant protocols. # Is Your Practice Struggling to Stay Profitable? We specialize in practices that are overwhelmed or on the brink, rebuilding billing workflows so claims get paid, cashflow stabilizes, and your practice can breathe again. # The Elevate Turnaround Method Every turnaround follows the same three phases. We stop the bleeding first, then go after the money you're already owed, and then build the system that keeps your practice profitable once we've stabilized it. ## Stabilize Stop the revenue from leaking out. We find out exactly why claims aren't getting paid and fix the workflow so new claims go out clean, complete, and on time. - Denial and rejection root-cause review - Claim submission and coding cleanup - Eligibility and documentation checks ## Recover Go after the money you've already earned. We work your aging A/R, correct and resubmit what can be fixed, and appeal what should have been paid in the first place. - Aging A/R cleanup, even months or years back - Corrected claims and resubmissions - Denial appeals and payer follow-up ## Sustain Keep the practice profitable. You work directly with the person doing your billing, with the oversight and reporting that keep denials low and cashflow steady. - Denial prevention built into the workflow - Ongoing billing, oversight, and staff support - Financial reporting that shows what the practice actually earns # What Is Your Billing System Costing You? Move the sliders to match your practice and you'll see a rough estimate of how much revenue is slipping away to denials that never get worked, and how much cash is sitting in slow A/R instead of in your account. Monthly charges billed Denial rate The share of claims denied on first submission. Denials that never get reworked If your team is behind, this is often more than half. Days in A/R How long, on average, it takes to get paid after a claim goes out. Estimated revenue lost to unworked denials each month The same leak over a full year This is a rough estimate based only on the numbers you enter, not a quote or a promise of results. The Revenue Rescue Assessment looks at your real claims data. # The Real Reasons Practices Fail Most practices don't go under because of clinical care. They fail because billing systems break down, claims pile up, denials spike, documentation slips, and cashflow collapses. We fix the underlying revenue problems that traditional billing companies overlook. ## Broken Claims Workflow Late submissions, missing documentation, and inconsistent coding are the fastest way a practice loses money. We rebuild the claims workflow so every claim goes out clean, complete, and on time. Every time. ## Rising Denials and Lost Revenue If your denials are piling up, your revenue is bleeding out. We find the root cause: coding errors, documentation gaps, eligibility failures, and put a system in place that prevents denials before they happen. ## A/R Backlog and Unpaid Claims Months (or years) of unpaid claims can suffocate a practice. We clean up old A/R, recover lost revenue, and put accountability steps in place so your cashflow stops slipping through the cracks and you can finally reach profitability (and real stability) for your practice. ## Staff Overload and Documentation Issues Most in-house teams don't have the training or the bandwidth to manage billing at the level required to stay profitable. We provide the expertise, oversight, and documentation support your staff can't realistically handle. # Everything a Turnaround Takes, Under One Roof Fixing the billing is where most turnarounds start, but it's rarely where they end. A practice gets back to profitability when the claims, the contracts, and the business numbers are all working, so we handle all of them instead of handing you off to three different firms. ## Revenue Cycle Management The billing engine that gets claims out clean, gets them paid, and goes after what's owed. - Medical coding, billing, and collections - Denial management - A/R recovery - Insurance eligibility verification - Insurance follow-up - Patient collections ## Practice Financial Management The full financial picture, so you know what the practice actually earns and what it costs to earn it, not just what was collected. - Monthly financial and operational reporting - Bookkeeping and accounting oversight - Cash-flow and budgeting analysis - Provider and service-line profitability - Overhead and break-even analysis - Payroll and staffing cost review ## Payer and Reimbursement Strategy A close look at whether your payer contracts are paying what they should, and support when it's time to push for better terms. - Payer and managed-care contract review - Fee schedule analysis - Underpayment analysis - Reimbursement analysis and modeling - Payer performance analysis - Payer negotiation support ## ASC Management and Consulting Financial, reimbursement, and operational consulting built specifically for ambulatory surgery center owners. - Financial reporting and budgeting - Case and procedure profitability - Payer mix and reimbursement analysis - Facility utilization - Staffing and supply cost analysis - Growth and expansion modeling ## Strong case volume doesn't always mean strong profitability. A surgery center can stay busy and still lose ground when reimbursement lags, payer contracts underperform, staffing and supply costs creep up, or nobody knows the true margin on each procedure. We put those pieces together so ASC owners can see which cases and contracts are carrying the center, which ones are holding it back, and what to change first. # What Happens When We Repair a Broken Billing System Three practices that were losing ground, and where they stood once the billing system was rebuilt. $250K/mo Monthly revenue, up from $100K, within 5 months ## Surgical Center Turnaround We rebuilt the billing workflow for a failing surgical center that was drowning in denials and missing documentation. By fixing coding errors, clearing old A/R, and stabilizing submission processes, revenue more than doubled within five months. 65% Reduction in outstanding A/R within 6 months ## Family Clinic Revitalization A small family clinic was overwhelmed with months of unpaid claims and collapsing cashflow. We cleaned up their backlog, corrected coding inconsistencies, and implemented denial-prevention protocols, stabilizing revenue flow in under four months. 12% Denial rate, down from 30%, within 9 months ## Orthopedic Practice Recovery This orthopedic practice was losing thousands monthly due to preventable denials and poor documentation. After restructuring their billing workflow and improving coding accuracy, we slashed their denial rate by 60% and restored consistent reimbursements. # Led by a Certified Medical Revenue Manager Elevate Medical Resources was founded by Jeff Ramos, a veteran of more than 18 years in the healthcare industry who's accredited as a Certified Medical Revenue Manager (CMRM) by the Medical Revenue Management Association of America. Our experience goes beyond traditional medical billing. We've managed an ambulatory surgery center ourselves, which gives us firsthand insight into the financial and operational challenges practice and ASC owners face every day, and our coders hold certifications from AAPC and AHIMA. - 18+ years in healthcare Revenue cycle, practice management, and private practice business support - CMRM accredited Certified Medical Revenue Manager through the MRMAA - AAPC and AHIMA certified coders Coding handled by credentialed professionals - Hands-on ASC management Experience running a surgery center, not just billing for one # See What a Revenue Cycle Audit Actually Uncovers These two anonymized case studies walk through real audits we've done, including where the money was going, what was driving it, and the plan to get it back. The practices' names have been removed, but the numbers are real. ## What a Revenue Cycle Audit Can Reveal An urgent care practice with $1.45M in aging A/R and losses spread across charge capture, coding, eligibility, and follow-up. 288 Encounters never charged 40% Estimated coding error rate . Your white paper is ready. ## Revenue Cycle Audit Findings and a Recovery Framework A multi-location gastroenterology practice carrying more than $18M in unresolved A/R, and the phased plan to recover it. $814K Recoverable denied claims 272 Coding errors found . Your white paper is ready. # Start With a Free Revenue Rescue Assessment Before we talk about fixing anything, we look at where your revenue is actually going. We'll review your denials, your aging A/R, and the way claims move through your practice, then walk you through what we found and what your turnaround would look like. There's no cost and no obligation, and you'll come away knowing where the money is leaking whether you work with us or not. - Denial pattern review Which payers are denying claims, for what reasons, and how much it's costing you. - Aging A/R review How much is sitting unpaid, how old it is, and how much of it is still recoverable. - Claims workflow review Where claims slow down, get missed, or go out with errors before they ever reach the payer. - Your turnaround plan A clear walkthrough of what we'd fix first and what it would take to get your practice profitable again. # Frequently Asked Questions What struggling practices ask us most when their billing system is breaking down. How do you fix a failing or financially struggling practice? We start by diagnosing the root revenue problems: late claims, missing documentation, coding inconsistencies, rising denials, or unpaid A/R. Then we rebuild the billing workflow from the ground up, clean up old claims, and put a system in place that stabilizes cashflow quickly. What makes Elevate different from typical medical billing companies? Most billing companies want clean, stable, low-maintenance practices. We specialize in practices that are overwhelmed, behind, or struggling financially. You work directly with the person doing your billing. Not a call center, not a rotating team. Our entire focus is rebuilding revenue systems so your practice becomes profitable again. Do you integrate with my existing EHR or practice management software? Yes. We work within your existing systems and workflows. No new software, no complicated setup. Just immediate operational improvement. What type of practices do you work with? We primarily help small and mid-sized practices, surgery centers, specialty clinics, and solo providers who are: - Losing money - Behind on claims - Drowning in denials - Struggling with billing staffing - Working A/R that never gets resolved If your practice is financially strained, that's when we deliver the most value. Can you help recover old A/R or unpaid claims? Yes. We specialize in cleaning up old A/R, even months or years of it. We aggressively work unpaid claims, correct errors, and appeal what should have been paid. Practices often see immediate cashflow improvement from A/R recovery alone. How quickly can you turn around a struggling practice? Most practices begin seeing measurable improvements in 30 to 90 days. Denials drop, A/R reduces, and cashflow stabilizes as we rebuild your billing system. # Start Your Practice Turnaround Tell us where your billing stands today and we'll set up your free Revenue Rescue Assessment, then schedule a call to walk you through what we found and what your turnaround plan looks like. 9100 Conroy Windermere Road, Suite 200, Windermere, FL 34786 Monday to Friday, 8:30 AM to 5:30 PM © 2026 Elevate Medical Resources. All rights reserved. All information submitted through this site is encrypted and handled under HIPAA-compliant protocols. # Contact Phone: (321) 287-0702 Email: jeff@elevatemedicalresources.com Address: 9100 Conroy Windermere Road, Suite 200, Windermere, FL 34786 Hours: Monday to Friday, 8:30 AM to 5:30 PM Eastern # Services ## Revenue Cycle Management URL: https://elevatemedicalresources.com/services/revenue-cycle-management/ Revenue cycle management covers everything that happens between scheduling a patient and collecting the last dollar for their visit. When any step breaks down, whether it’s eligibility, coding, claim submission, denial follow-up, or patient balances, the practice gets paid late or not at all. Elevate runs the full revenue cycle for practices that want it handled end to end, and it’s built for practices that are behind or struggling, not just the clean, easy accounts. You work directly with the person doing your billing, and we work inside your existing EHR and practice management software. What’s included: - Insurance eligibility verification and prior authorizations - Medical coding by AAPC and AHIMA certified coders - Claim submission and clearinghouse rejection follow-up - Denial management and appeals - Insurance follow-up on unpaid and pending claims - Payment posting and underpayment review - Patient statements and collections - Monthly reporting on collections, denials, and days in A/R Who it’s for: - Practices whose cash flow doesn’t match how busy they are - Practices with rising denials or a growing A/R backlog - Offices where one or two billing staff can’t keep up - Practices that want billing handled completely instead of in pieces Common questions: - What does revenue cycle management include? It covers every step of getting paid: eligibility and authorizations, coding, claim submission, denial management, insurance follow-up, payment posting, and patient collections, along with the reporting that shows how each step is performing. - Do we have to change our EHR or practice management system? No. Elevate works inside your existing systems and workflows, so there’s no new software for your team to learn. ## Medical Billing and Coding URL: https://elevatemedicalresources.com/services/medical-billing-and-coding/ We take the headache out of coding and billing. Because claims are filed promptly and accurately, the time it takes to collect is shorter, and your team isn’t stuck correcting and resending the same claims. Coding is handled by certified coders credentialed through AAPC and AHIMA. With that expertise and the practice management systems we use, you can concentrate on practicing medicine knowing the financial side of your practice is professionally managed. What’s included: - Certified coding of procedures and diagnoses, including modifiers - Review of documentation against codes before claims go out - Charge entry and claim creation - Electronic claim submission and clearinghouse rejection follow-up - Coding feedback to providers when documentation causes denials - Payment posting and reconciliation Who it’s for: - Practices without a certified coder on staff - Practices seeing denials for coding or documentation errors - Providers who want billing off their plate entirely Common questions: - Are your coders certified? Yes. Elevate’s coders hold certifications from AAPC and AHIMA, the two main credentialing organizations for medical coding. - Can you take over billing from our current staff or company? Yes. Elevate can take over billing and coding from an in-house team or another billing company and work inside your existing systems. ## Denial Management URL: https://elevatemedicalresources.com/services/denial-management/ Elevate offers a full suite of denial management services, including A/R follow-up, claim status checks, resolution of denied claims, and appeal letters, all with one goal in mind: collecting every dollar due for the services you’ve provided. The terms denial and rejection are often used interchangeably, but they aren’t the same. A rejected claim was never accepted by the payer, so it never entered their system and has to be corrected and resubmitted. Cash flow often suffers because no one is watching the rejection reports. A denied claim was received and processed and found unpayable, and it represents unpaid services and lost or delayed revenue until it’s corrected or appealed. What’s included: - Daily review of clearinghouse rejection reports - Claim status checks with payers - Correction and resubmission of denied claims - Appeal letters and supporting documentation - Denial tracking by payer, reason code, and provider - Root-cause fixes at the front desk, in coding, and in documentation Who it’s for: - Practices with a denial rate that keeps climbing - Offices where denials sit in a work queue until deadlines pass - Practices that don’t know why their claims are being denied Common questions: - What is the difference between a rejected claim and a denied claim? A rejected claim was never accepted by the payer because of an error, so it has to be corrected and resubmitted. A denied claim was processed and found unpayable, so it has to be corrected or appealed. - Can old denials still be recovered? Many can, as long as they’re still within the payer’s correction or appeal window. The oldest and highest-dollar denials should be worked first. ## Medical A/R Recovery URL: https://elevatemedicalresources.com/services/ar-recovery/ Many physicians find their practice generating steady or growing monthly charges without seeing the same growth in cash flow. Without consistent, active follow-up on accounts receivable, it’s common to find large balances that are more than 180 days outstanding. The volume of outstanding claims, and the time it takes to research, correct, appeal, and re-file them, is usually far greater than expected, and a small staff can’t get through it. Elevate’s A/R recovery program assigns a full team of experienced medical billing collectors to work the backlog, with the goal of collecting as much as possible as quickly as the payers allow. What’s included: - Aging report review, sorted by payer, balance, and deadline - Claim research through payer portals and calls - Corrected claims and resubmissions - Appeals for claims that should have been paid - Underpayment identification on closed claims - Documented write-offs for balances with no path to payment Who it’s for: - Practices with a large share of A/R older than 90 days - Practices that switched billing staff or companies and left claims behind - Practices preparing for a sale, merger, or new billing setup Common questions: - How far back can you recover claims? Claims can often be recovered as long as they’re within the payer’s filing, correction, or appeal window. Medicare generally allows filing up to a year from the date of service, while commercial deadlines vary by contract. - Will working old A/R slow down our current billing? It shouldn’t. A/R recovery works best as a focused project run alongside day-to-day billing so current claims don’t fall behind. ## Eligibility Verification and Prior Authorization URL: https://elevatemedicalresources.com/services/eligibility-verification-and-prior-authorization/ Insurance eligibility verification is more critical than ever. A patient can have active coverage one month and stop paying premiums the next, and under Affordable Care Act grace periods, claims for services in the second and third months can go unpaid if the premium isn’t caught up, leaving the practice to collect from the patient. Verifying eligibility makes sure the patient has coverage, the services are covered, and the right authorizations are in place, so denials and appeals are minimized and payments come in at the appropriate rates. Claims denied for no active coverage, out-of-network status, or unauthorized procedures are a major, avoidable loss of revenue. What’s included: - Eligibility and benefits checks before every visit - Coverage, copay, deductible, and network status confirmation - Prior authorization requests and tracking - Referral verification where plans require it - Alerts to the front desk when coverage has changed Who it’s for: - Practices with denials for inactive coverage or missing authorizations - Specialties that rely on procedures and imaging needing authorization - Front desks without time to verify every patient Common questions: - Why verify eligibility before every visit? Coverage changes more often than most practices expect. Checking before each visit catches plan changes, lapsed coverage, and authorization needs before they turn into denials. - Do you handle prior authorizations? Yes. Elevate submits and tracks prior authorization requests so procedures aren’t performed without the approval the payer requires. ## Patient Collections and Insurance Follow-Up URL: https://elevatemedicalresources.com/services/patient-collections-and-insurance-follow-up/ Stay on top of unpaid and pending claims with consistent insurance follow-up that identifies delays, resolves issues, and secures the reimbursement your practice has earned. Claims don’t get paid just because they were submitted, and the ones nobody checks on are the ones that age past recovery. Patient balances matter just as much as insurance payments. Proactive patient collections improve cash flow and reduce outstanding balances with strategies that make payment easier while maintaining a professional, patient-friendly experience. What’s included: - Scheduled follow-up on every unpaid and pending claim - Responses to payer requests for records or information - Clear patient statements and payment reminders - Patient balance questions handled professionally - Payment plan setup where the practice allows it Who it’s for: - Practices with claims sitting unpaid past 30 to 60 days - Practices with growing patient balances - Offices where statements go out late or not at all Common questions: - How often should unpaid claims be followed up on? Claims should be checked at set intervals rather than when someone has time. Regular follow-up catches problems while there’s still time to fix them within payer deadlines. - Will patient collections upset our patients? It shouldn’t. The approach is to make paying easier with clear statements and reminders, while keeping every interaction professional and respectful. ## Provider Credentialing and Payer Enrollment URL: https://elevatemedicalresources.com/services/credentialing/ A provider can’t be paid by an insurance plan until they’re credentialed and enrolled with it. Credentialing is detailed, slow, and easy to get wrong, and a missed revalidation or an out-of-date profile can quietly stop payments that the practice was counting on. Elevate handles credentialing and payer enrollment for new providers, new locations, and existing providers who need to be re-credentialed, and it tracks the deadlines so enrollments don’t lapse. What’s included: - Commercial payer credentialing and contracting applications - Medicare and Medicaid enrollment and revalidation - CAQH profile setup, updates, and attestations - Re-credentialing and revalidation deadline tracking - Updates when providers, addresses, or tax IDs change - Follow-up with payers until enrollment is complete Who it’s for: - Practices adding a new provider or location - New practices getting set up with insurance plans - Practices with claims denied because a provider wasn’t enrolled Common questions: - What is provider credentialing? It’s the process of verifying a provider’s qualifications with an insurance plan and enrolling them so the plan will pay for their services. - Why were our claims denied for credentialing? Common causes are a provider who was never fully enrolled, an expired revalidation or CAQH attestation, or a change in address or tax ID that wasn’t updated with the payer. ## Dental Billing URL: https://elevatemedicalresources.com/services/dental-billing/ Dental billing has its own codes, plan rules, and frequency limits, and dental offices often ask front desk staff to handle it alongside everything else. When claims go out late or incomplete, or benefits aren’t verified, the practice waits longer to be paid and patients get surprised by balances. Elevate provides complete dental billing so claims go out accurately and get followed through to payment, and it can also handle cases where a dental procedure needs to be billed to medical insurance. What’s included: - Dental insurance eligibility and benefits verification - Pre-treatment estimates and predeterminations - CDT coding and claim submission with required attachments - Medical-dental cross coding when medical insurance applies - Denial follow-up and appeals - Payment posting and patient balance statements Who it’s for: - Dental practices whose front desk also handles billing - Practices with aging dental insurance claims - Offices that want billing handled completely Common questions: - Do you work with dental practices? Yes. Elevate provides complete dental billing, from verification and pre-treatment estimates through claims, follow-up, and patient balances. - Can dental procedures be billed to medical insurance? Some can, such as certain oral surgery or trauma-related services. Cross coding to medical insurance requires the right documentation and medical codes. ## Optometry Billing URL: https://elevatemedicalresources.com/services/optometry-billing/ Optometry practices bill two very different kinds of coverage. Routine eye exams and materials are often billed to vision plans, while medical eye care is billed to the patient’s medical insurance. Choosing the wrong one, or coding a visit incorrectly, is one of the most common reasons eye care claims are denied or underpaid. Elevate provides complete optometry billing that sorts each visit to the right plan, codes it correctly, and follows every claim through to payment. What’s included: - Vision plan and medical insurance eligibility checks - Routine versus medical visit coding - Vision plan claims for exams and materials - Medical claims for diagnosis and treatment of eye conditions - Denial follow-up, appeals, and payment posting - Patient statements for balances not covered by either plan Who it’s for: - Optometry practices billing both vision plans and medical insurance - Practices seeing denials or underpayments on medical eye visits - Offices that want billing handled completely Common questions: - Do you bill vision plans and medical insurance? Yes. Elevate bills both, and part of the work is making sure each visit goes to the right plan with the right codes. - Why are optometry claims denied? Common reasons include billing a routine exam to medical insurance or the reverse, missing diagnosis codes for medical visits, and eligibility issues with vision plans. ## Automated A/R and A/P URL: https://elevatemedicalresources.com/services/automated-ar-and-ap/ A lot of what goes wrong in a practice’s finances comes from work that depends on someone remembering to do it, such as checking a claim status, sending a statement, paying a vendor on time, or reconciling a deposit. Automating those routines means they happen on schedule whether or not the office is having a busy week. On the receivables side, Elevate automates follow-up so unpaid claims and patient balances are worked consistently. On the payables side, it organizes and processes the practice’s bills and expenses, so vendors are paid on time and owners can see where the money is going. What’s included: - Automated claim status checks and follow-up queues - Automated patient statements and payment reminders - Payment posting and bank, merchant, and patient payment reconciliation - Vendor invoice collection, approval, and bill pay - Expense tracking and categorization - Reporting on receivables, payables, and cash position Who it’s for: - Practices where follow-up only happens when someone has time - Owners paying bills themselves after hours - Practices that want a clear view of money coming in and going out Common questions: - What does automated A/R mean for a medical practice? It means routine receivables work, such as claim status checks, follow-up, patient statements, and reminders, runs on a set schedule instead of depending on staff availability. - What’s included in A/P for a practice? Collecting and approving vendor invoices, paying bills on time, tracking and categorizing expenses, and reconciling payments so the books stay accurate. ## Virtual Practice Manager URL: https://elevatemedicalresources.com/services/virtual-practice-manager/ Many practices don’t have, or can’t afford, a full-time practice manager, so day-to-day operations land on a physician or an overloaded office lead. Things like scheduling problems, staffing gaps, vendor issues, and front desk workflows get handled in between patients, and the business side slowly drifts. Elevate’s Virtual Practice Manager service provides a remote practice manager who handles those day-to-day operations for you and works closely with the billing and financial side, so operations and revenue are managed together. What’s included: - Day-to-day operations oversight - Staff coordination, scheduling, and task follow-up - Front desk and check-in workflow management - Vendor, supply, and service contract management - Policies, procedures, and office process improvements - Regular reporting to the practice owner on operations and key numbers Who it’s for: - Practices without a dedicated practice manager - Physician owners spending evenings on operations - Practices whose manager left and need coverage Common questions: - What is a virtual practice manager? It’s a remote practice manager who handles the day-to-day operations of a medical practice, such as staff coordination, workflows, vendors, and reporting, without being on site full time. - Is a virtual practice manager a replacement for a full-time hire? For many small and mid-sized practices it can be, and for others it fills the gap while they hire or supports an office lead who needs help. ## Practice Financial Management URL: https://elevatemedicalresources.com/services/practice-financial-management/ Running a successful medical practice takes more than submitting claims and collecting payments. Physicians need to understand where the practice is making money, where revenue is being lost, how overhead affects profitability, and whether reimbursement keeps pace with the cost of providing care. Elevate works with physicians beyond traditional billing. The goal isn’t simply to show you how much was collected. It’s to help you understand what the practice actually earned, what it cost to produce that revenue, and where the opportunities are to improve financial performance, so you can make decisions based on real numbers. What’s included: - Monthly financial and operational reporting - Bookkeeping and accounting oversight - Accounts payable and expense management - Accounts receivable and collection performance - Bank, merchant, and patient payment reconciliation - Cash-flow and budgeting analysis - Provider and service-line profitability - Overhead and break-even analysis - Payroll and staffing cost review - Practice profitability analysis - Financial forecasting and growth planning - Practice management support Who it’s for: - Owners who only see collections and not true profitability - Practices where expenses have grown faster than revenue - Practices planning to add providers, locations, or services Common questions: - What is practice financial management? It’s ongoing oversight of a practice’s finances and operations, including reporting, bookkeeping oversight, cash flow, profitability by provider and service line, and overhead, so owners can see the full picture. - How is this different from billing? Billing focuses on getting claims paid. Practice financial management looks at the whole business, including what it costs to earn that revenue and which parts of the practice are profitable. ## Payer Contract Review and Reimbursement Strategy URL: https://elevatemedicalresources.com/services/payer-contract-review/ Changes in the economics of healthcare have made managed care contracts more important than ever. Physicians can no longer simply trust that they’re being paid fairly and accurately according to the contracts they signed. The reimbursement rate is only one piece of the puzzle. Contracts also define which benefits are covered, stop-loss provisions, incentives, and how members are counted and allocated. They’re legally binding documents that deserve careful review, yet many physicians sign them without challenging or negotiating rates. Contracting isn’t a one-time event either. It calls for an annual analysis of your top payers: the current reimbursement rate, the volume of encounters, and the revenue each payer brings in. What’s included: - Payer and managed care contract review - Fee schedule analysis - Underpayment analysis against contracted rates - Reimbursement analysis and modeling - Payer performance analysis - Payer negotiation support Who it’s for: - Practices that haven’t reviewed their contracts in years - Practices that suspect payers are paying below contract - Practices preparing to renegotiate with a major payer Common questions: - How often should a practice review its payer contracts? An annual review of your top payers is a good baseline, looking at contracted rates, encounter volume, and revenue by payer. - How do you find underpayments? By comparing what each payer actually paid against the contracted rate for your highest-volume codes, which often reveals payments below contract that no one flagged. ## ASC Management and Consulting URL: https://elevatemedicalresources.com/services/asc-management-consulting/ Managing an ambulatory surgery center takes more than keeping cases moving and claims paid. ASC owners need a clear understanding of reimbursement, operating costs, case profitability, payer performance, and the overall financial health of the facility. Elevate brings hands-on ASC management experience together with expertise in revenue cycle management, healthcare accounting, and payer contracting. That lets us look beyond billing and help owners understand what’s driving, or limiting, the profitability of their center. What’s included: - Financial reporting and budgeting - Case and procedure profitability - Payer mix and reimbursement analysis - Facility utilization - Staffing and supply cost analysis - Growth and expansion modeling - ASC billing and revenue cycle support Who it’s for: - Surgery centers that are busy but seeing margins shrink - Owners who don’t know the true margin on each procedure - Centers planning to add specialties, rooms, or payers Common questions: - Why can a busy surgery center still lose money? Volume can hide problems with case costs, payer contracts, supply and implant spending, and room utilization. Some procedures may lose money under certain contracts, which only shows up in case-level analysis. - Does Elevate have ASC experience? Yes. Elevate’s team has hands-on experience managing an ambulatory surgery center, along with revenue cycle, accounting, and payer contracting expertise. ## Revenue Cycle Audit URL: https://elevatemedicalresources.com/services/revenue-cycle-audit/ A revenue cycle audit is a structured review of how your practice gets paid, from registration and eligibility through coding, claims, denials, payment posting, and collections. It shows where revenue is being lost or delayed, estimates how much, and separates what can still be recovered from what’s already gone. Elevate’s free Revenue Rescue Assessment is a focused version of this review. We look at your denial patterns, aging A/R, and claims workflow, then walk you through what we found and what a turnaround plan would look like, with no cost or obligation. What’s included: - Denial pattern review by payer, reason, and provider - Aging A/R review and recoverability estimate - Claims workflow review from charge entry to payment - Charge capture and coding accuracy checks - Payments compared against contracted rates - A prioritized turnaround plan Who it’s for: - Practices whose cash flow dropped without an obvious reason - Practices after a change in billing staff, company, or software - Owners deciding whether to outsource billing Common questions: - Is the Revenue Rescue Assessment really free? Yes. It’s a free, no-obligation review of your denials, aging A/R, and claims workflow, followed by a call to walk through what we found. - What does a revenue cycle audit usually find? Common findings include charges that were never billed, coding errors, unworked denials, large balances over 90 days, and payments below contracted rates. # Guides ## Why Is My Medical Practice Losing Money When We’re Busy? URL: https://elevatemedicalresources.com/guides/why-is-my-medical-practice-losing-money/ A busy medical practice usually loses money in the gap between the visit and the payment, not in the exam room. The six leaks that show up most often are charges that never get billed, claims that go out with errors, denials that nobody works, accounts receivable that ages past 90 days, payers that pay below the contracted rate, and overhead that grew faster than collections. The numbers behind those leaks are larger than most owners expect. Change Healthcare’s national denials index has put initial denial rates near 10 percent of claims, MGMA estimates that reworking a single denied claim costs about $25 in staff time, and MGMA has also reported that as many as 65 percent of denied claims are never resubmitted at all. Finding your own leaks means pulling five numbers, listed at the end of this guide, and reading them together. It’s one of the most frustrating spots a practice owner can be in. The schedule is full, providers are seeing patients all day, and yet there’s less money at the end of the month than there should be. Payroll feels tight, bills get paid late, and nobody can quite explain where the revenue went. In most cases the problem isn’t the clinical side of the practice. Patients are being seen and services are being delivered, but the money that work earns isn’t making it all the way into the practice’s account. That gap almost always lives somewhere between the moment a service is performed and the moment a payment is posted. ### Charges that never get captured The first leak is the easiest one to miss. If a service is performed but never makes it onto a claim, the practice will never be paid for it. This happens when encounters aren’t closed out in the EHR, when a procedure or injection isn’t documented alongside the visit, or when charges are entered late and then forgotten. Charge capture problems are hard to see from the outside because there’s no denial or rejection to flag them, since the claim simply never exists. The only way to find these gaps is to compare what was scheduled and documented against what was actually billed. ### Claims that go out wrong A claim that leaves the practice with a missing modifier, an outdated insurance ID, a diagnosis code that doesn’t support the procedure, or missing documentation will either be rejected by the clearinghouse or denied by the payer. Each one then needs to be found, corrected, and resubmitted, which costs staff time and delays payment by weeks. Practices usually measure this as a clean claim rate, meaning the share of claims accepted and paid on the first submission. A commonly cited target is 95 percent or higher. When that number slips, the practice is paying its team to do the same work twice. ### Denials that nobody works Denied claims are recoverable revenue, but only if someone works them. In a busy office, the denials that are easy to fix get handled and the rest pile up in a work queue until they pass the payer’s correction or appeal deadline, and at that point the money is usually gone for good. This is often the single biggest leak in a struggling practice. It isn’t that the practice did the clinical work wrong, it’s that the follow-up never happened because the billing staff were already stretched. ### Slow accounts receivable Even when claims are eventually paid, slow payment hurts. Days in A/R measures how long, on average, it takes to collect after a claim goes out. MGMA benchmarking puts better-performing practices under 40 days, and many well-run practices keep it somewhere in the 30s. When it drifts to 60 or 90 days, a practice can have plenty of revenue on paper and still struggle to make payroll, because the cash is sitting with payers instead of in the bank. It’s also worth looking at how much of the A/R is older than 90 days. A commonly cited benchmark is to keep the share older than 120 days in the low teens or below, and the older a claim gets, the less likely it is to be paid at all. ### Payer contracts that underpay Some practices are paid less than they should be even on claims that go through cleanly. Payers sometimes pay below the contracted rate, apply the wrong fee schedule, or bundle services that should be paid separately. Without someone comparing payments against the contract, these underpayments can go unnoticed month after month. Contracts themselves can also fall behind. A fee schedule that hasn’t been reviewed or renegotiated in years may no longer reflect what it costs to deliver care. ### Costs that grew faster than revenue Not every problem is on the revenue side. Staffing, supplies, rent, and software costs tend to creep up gradually, and without regular financial reporting it’s hard to see that a provider, a location, or a service line has stopped paying for itself. MGMA cost data generally puts total operating costs for physician-owned practices in the range of 55 to 65 percent of revenue, so a practice that has drifted well above that range is losing margin even if collections look healthy. Many practices only look at collections, which tells you what came in but not what it cost to earn it. If part of the question is whether your billing team is the right size, our guide to [how much outsourced medical billing costs](/guides/how-much-does-outsourced-medical-billing-cost/) lays out the full comparison. ### How to find out which problem you have Most struggling practices have more than one of these issues at once, and they tend to feed each other. A good starting point is to pull a few numbers and look at them together: - Charges billed compared with what was scheduled and documented - Clean claim rate and initial denial rate, broken out by payer and by denial reason - Days in A/R and the share of A/R older than 90 days - Payments received compared with contracted rates for your highest-volume codes - Monthly revenue and expenses by provider or service line If those numbers are hard to produce, that itself is a sign the billing system needs attention. A revenue cycle audit pulls them together from your real claims data and shows which leaks are costing you the most, so you know what to fix first. Common questions: - Why does my practice have a full schedule but no money? Usually because revenue is being lost between the visit and the payment. Common causes are charges that never get billed, claims that go out with errors, denials that are never reworked, slow collections, and payer underpayments. - What is a good clean claim rate for a medical practice? A commonly cited target is 95 percent or higher, meaning at least 95 of every 100 claims are accepted and paid on the first submission without being corrected and resent. - How do I know if my practice has a billing problem? Warning signs include days in A/R above 50 or 60, a growing share of A/R older than 90 days, a rising denial rate, and cash flow that doesn’t match how busy the practice is. If your team can’t easily produce those numbers, that’s a warning sign too. - How much money does a practice lose to claim denials? It depends on the denial rate and how many denials get worked. Change Healthcare’s denials index has put initial denial rates near 10 percent of claims, MGMA estimates about $25 of staff time to rework each one, and MGMA has reported that as many as 65 percent of denied claims are never resubmitted, which means the revenue behind them is written off. - Which numbers should I check first if my practice is losing money? Start with five: charges billed compared with visits documented, clean claim rate and initial denial rate by payer and reason, days in A/R and the share of A/R older than 90 days, payments compared with contracted rates on your highest-volume codes, and monthly revenue and expenses by provider or service line. - Is the problem my billing staff or my payer contracts? Often both, but the numbers separate them. Denials, rejections, and aging A/R point to the billing process. Clean claims that still pay less than expected point to underpayments or outdated fee schedules, which is a contract problem. ## How to Lower Your Practice’s Claim Denial Rate URL: https://elevatemedicalresources.com/guides/how-to-reduce-claim-denials/ To reduce claim denials at a medical practice, verify eligibility and prior authorization before every visit, code from the documentation with certified coders, scrub every claim against payer rules before it leaves, work each denial inside the payer’s deadline, and change the workflow behind any denial reason that keeps coming back. Practices that do this consistently keep their initial denial rate at or under the 5 percent benchmark MGMA uses for better-performing practices, while Change Healthcare’s national denials index has put the average closer to 10 percent and found that most denials are avoidable. MGMA estimates each denial costs roughly $25 in staff time to rework, so prevention is cheaper than appeals, and the sections below take the five steps in the order they pay off. Every denied claim costs a practice twice. First there’s the delay in getting paid, and then there’s the staff time it takes to research the denial, correct the claim, and resubmit or appeal it. When denial rates climb, billing teams fall behind, the backlog grows, and some of that money is never collected. The good news is that most denials follow patterns. A practice that understands why its claims are being denied can usually prevent a large share of them from happening in the first place. ### The most common reasons claims are denied Denial reasons vary by specialty and payer, but a handful of causes show up in nearly every practice: - Eligibility and coverage problems, such as inactive coverage, the wrong payer on file, or a patient who changed plans - Missing or expired prior authorizations and referrals - Coding errors, including missing modifiers, codes that don’t match the documentation, and diagnosis codes that don’t support medical necessity - Missing or incomplete documentation requested by the payer - Duplicate claims submitted before the original was processed - Claims filed after the payer’s timely filing deadline - Coordination of benefits issues when a patient has more than one insurance plan ### Start by measuring it properly You can’t fix a denial problem you can’t see. The first step is to track your initial denial rate, meaning the share of claims denied on first submission, and to break it down by payer, by denial reason, by provider, and by location. MGMA uses 5 percent or lower as the benchmark for better-performing practices, and Change Healthcare’s denials index has put the national average closer to 10 percent. Your denial rate is simply the number of claims denied on first submission divided by the number of claims submitted in the same period. Every denial comes back with a reason code from the payer. Grouping denials by those codes usually reveals that a few root causes account for most of the problem, which tells you exactly where to focus. ### Fix the front end first A large share of denials start at the front desk, long before a claim is created. Verifying insurance eligibility before every visit, not just the first one, catches coverage changes before they turn into denials. So does confirming that prior authorizations and referrals are on file and still valid for the service being performed. The AMA’s 2023 physician survey found that practices complete about 43 prior authorizations per physician every week and spend roughly 12 hours of staff time on them, which is why this step needs an owner and a daily routine rather than a spare moment at check-in. Getting the patient’s demographic and insurance details right at check-in matters more than most practices realize, because a single wrong digit in a member ID can send a claim straight back. ### Tighten coding and documentation Coding denials usually trace back to a gap between what the provider documented and what was coded. Regular coding reviews help catch patterns, such as a modifier that’s consistently left off or a diagnosis that doesn’t support a frequently billed procedure. Certified coders, such as those credentialed through AAPC or AHIMA, are trained to catch these issues before the claim goes out. It also helps to give providers quick feedback when their documentation is causing denials, so the fix happens at the source instead of in the billing office. ### Scrub claims before they go out Most clearinghouses and practice management systems can check claims against payer rules before submission. Keeping those edits up to date, and actually working the claims they flag, stops many rejections and denials before they happen. ### Work every denial, and work it quickly Prevention won’t stop every denial, so the follow-up process matters just as much. Each denial should be assigned, worked, and either corrected, appealed, or written off for a documented reason. Payers set deadlines for corrected claims and appeals, and those windows close faster than most people expect, so the oldest and highest-dollar denials should be worked first. ### Close the loop The practices that keep denial rates low treat every denial as information. When the same reason keeps coming back, they change the workflow that caused it, whether that’s a front desk step, a coding rule, or a template in the EHR. Over time the denial rate comes down because the causes are removed, not just because the denials are worked faster. Common questions: - What is a good denial rate for a medical practice? A commonly cited target for the initial denial rate is 5 percent or lower. Many struggling practices run well above that, which usually points to front-end, coding, or documentation problems. - What is the most common reason for claim denials? Eligibility and coverage problems, missing prior authorizations, coding errors, and missing documentation are among the most common. The mix varies by specialty and payer, which is why tracking denials by reason code matters. - Can denied claims still be paid? Yes, many can. Denials can often be corrected and resubmitted or appealed, as long as it’s done before the payer’s deadline. Denials that sit unworked past those deadlines usually can’t be recovered. - How do I calculate my practice’s denial rate? Divide the number of claims denied on first submission by the total number of claims submitted in the same period. Track it monthly and break it down by payer, denial reason code, provider, and location so you can see where the denials come from. - How long does it take to lower a denial rate? Front-end fixes such as eligibility checks and claim scrubbing stop new denials within a billing cycle or two, because the claims that would have been denied never go out. Appealing the existing backlog takes longer and depends on each payer’s deadlines. - Should we appeal every denied claim? Work every denial, but not every one deserves an appeal. Correct and resubmit the ones caused by simple errors, appeal the ones with documentation to support them, and write off the rest with a documented reason so the team’s time goes to the claims that can actually be recovered. ## How to Recover Old Unpaid Insurance Claims and Aging A/R URL: https://elevatemedicalresources.com/guides/how-to-recover-old-unpaid-insurance-claims/ If your practice needs help recovering unpaid insurance claims, the realistic options are a medical billing company that runs accounts receivable recovery projects, a revenue cycle consultant who audits the backlog and works it alongside your staff, your clearinghouse’s claim follow-up service, or a healthcare collection agency for the patient-balance portion. Whoever you choose should work inside your existing practice management system, sort the backlog by deadline and dollar value before touching a single claim, and report what was recovered claim by claim. The clock matters more than the vendor does: under CMS rules Medicare allows 12 months from the date of service to file a claim, commercial payers commonly allow 90 to 180 days, and appeal windows are separate and often shorter. This guide covers what’s actually in a backlog, how to prioritize it, who can help, and what to ask before you hire anyone. Many practices are sitting on money they’ve already earned. It shows up on the aging report as claims that are 90, 180, or 365 days old, and after a while it starts to feel like a number nobody expects to collect. Some of it truly is lost, but a meaningful share of old A/R can often still be recovered if it’s worked in the right order and before the remaining deadlines close. ### Understand what’s actually in the backlog The first step is to stop looking at A/R as one big number. An aging report breaks outstanding claims into buckets, usually 0 to 30 days, 31 to 60, 61 to 90, 91 to 120, and over 120 days. The older buckets are where recoverable money is most at risk. Within each bucket, claims generally fall into a few groups: - Claims that were never received by the payer, often because a rejection at the clearinghouse was never worked - Claims that were denied and never corrected or appealed - Claims that were paid incorrectly or underpaid - Claims pending with the payer for more information, such as records or an itemized bill - Balances that belong to the patient after insurance paid its share Each group needs a different action, so sorting the backlog this way is what turns it from an overwhelming number into a work plan. ### Know your deadlines Every payer has rules about how long you have to file a claim, correct it, and appeal a denial. Under CMS rules Medicare generally allows claims to be filed up to 12 months from the date of service, and commercial payers often set shorter limits, commonly 90 to 180 days, that vary by contract. Appeal windows are separate and also vary by payer. Because these windows are different for every payer, the backlog should be prioritized with them in mind. A claim that’s close to a deadline needs attention before a newer claim with more time left. ### Work the highest-value claims first Not every old claim is worth the same effort. A practical approach is to sort by dollar amount and deadline, then work the largest balances that are still within a filing or appeal window first. Small balances with no realistic path to payment may be better written off with a documented reason, so the team’s time goes where it can actually recover money. ### Find out why each claim is stuck For every claim, the key question is why it hasn’t been paid. Checking the payer portal or calling the payer usually answers it. Sometimes the fix is as simple as resubmitting a claim the payer never received, and sometimes it means gathering records, correcting codes, or writing a formal appeal. When claims are resubmitted or appealed, keep proof of timely filing, such as clearinghouse acceptance reports. That documentation is often what gets an old claim paid when a payer says it was filed late. ### Don’t forget underpayments A claim that was paid isn’t always a claim that was paid correctly. Comparing payments against your contracted rates can reveal underpayments that are still eligible for an appeal. These are easy to overlook because the claim shows as closed. ### Who can help, and how they’re paid Most practices don’t have spare staff to work a backlog on top of current claims, so the work is usually handed to one of these: - A medical billing company that takes on A/R recovery as a project. Many bill it as a percentage of what they recover, and because old claims take more work than current ones, that percentage is commonly higher than a standard billing rate, often in the 10 to 20 percent range in published pricing. Some charge hourly or a flat project fee instead. - A revenue cycle consultant who audits the backlog, sorts it, and either works it or directs your team through it. This fits practices that want to keep the work in-house but need a plan and oversight. - Your clearinghouse, if it offers claim status and follow-up services. These tend to be limited to tracking and resubmission rather than appeals. - A healthcare collection agency for balances that belong to patients after insurance has paid. Agencies work on contingency, commonly 25 to 35 percent of what they collect, and should never be used for the insurance side of the backlog. Whoever you hire, ask the same questions you’d ask any billing vendor: who will work the claims, whether they work inside your system, how they prioritize by deadline, what they report, and whether they’ll sign a Business Associate Agreement. Our guides on [in-house vs. outsourced collections](/guides/in-house-vs-outsourced-medical-collections/) and [how much outsourced medical billing costs](/guides/how-much-does-outsourced-medical-billing-cost/) cover the pricing models in more detail, and Elevate’s [A/R recovery service](/services/ar-recovery/) runs this kind of project inside your existing software. ### Stop the backlog from rebuilding Clearing old A/R helps cash flow right away, but the backlog will come back unless the cause is fixed. That usually means working denials and rejections every week, following up on claims at set intervals instead of waiting, and tracking days in A/R and the share of A/R over 90 days as regular numbers the practice watches. Recovering old A/R works best as a focused project, sometimes called an A/R cleanup or recovery effort, run alongside the day-to-day billing so the current claims don’t fall behind while the old ones are being worked. Common questions: - Can you still collect on old insurance claims? Often, yes. Claims that were never received, were denied and never appealed, or were underpaid can frequently still be recovered if they’re within the payer’s filing or appeal window. Claims past every deadline usually can’t be. - How long do you have to file a claim with Medicare? Medicare generally allows claims to be filed up to one year from the date of service. Commercial payers set their own limits, which are often shorter and vary by contract. - What should I work first in an A/R backlog? Start with the highest-dollar claims that are closest to a filing or appeal deadline, then work down. Very small balances with no realistic path to payment may be better written off with a documented reason. - Who can help my practice recover unpaid insurance claims? A medical billing company that runs A/R recovery projects, a revenue cycle consultant who audits and works the backlog with your staff, your clearinghouse’s follow-up service, or, for patient balances only, a healthcare collection agency. The right one depends on how old the claims are and whether you want the work done for you or alongside you. - How much do A/R recovery services cost? Most billing companies price recovery of old claims as a percentage of what they collect, commonly higher than a standard billing rate because old claims take more work, with published ranges often between 10 and 20 percent. Some charge hourly or a flat project fee. Collection agencies for patient balances typically work on a 25 to 35 percent contingency. - Can a billing company recover claims that were already denied? Often, yes. Denied claims can be corrected and resubmitted or appealed as long as the payer’s correction or appeal window is still open. Claims past every deadline usually can’t be recovered no matter who works them. ## Outsourced vs. In-House Medical Billing: What It Really Costs URL: https://elevatemedicalresources.com/guides/outsourced-vs-in-house-medical-billing/ For a small practice, outsourced medical billing commonly costs between 4 and 10 percent of collections under published pricing, while an in-house biller costs a median salary of about $48,000 according to the Bureau of Labor Statistics, plus 25 to 30 percent for benefits and payroll taxes, plus software, clearinghouse fees, training, and coverage whenever that one person is out. For a practice collecting around $1 million a year, the two options land surprisingly close on paper. What decides it is what each option collects, not what it charges, because a single stretched biller who lets denials age past payer deadlines can cost a small practice more than any outside fee. This guide walks through the full cost of each side, what changes when the practice has only one or two providers, and the questions that decide which option fits. When a practice starts to struggle with billing, the question of whether to keep it in-house or outsource it usually comes up. It’s tempting to compare the salary of a billing employee with the fee a billing company charges and call it a decision, but that comparison leaves out most of what billing actually costs. ### What in-house billing really costs The visible cost of in-house billing is payroll, but the full picture is wider: - Salaries, benefits, and payroll taxes for billing and coding staff. The Bureau of Labor Statistics put the median pay for medical records and health information specialists at about $48,000 in May 2023, and its employer cost data shows benefits and payroll taxes typically adding 25 to 30 percent on top of wages. - Practice management software, clearinghouse fees, and coding tools - Training and certification to keep up with coding and payer rule changes - Coverage for vacations, sick days, and turnover, including the time it takes to hire and train a replacement - Management time spent overseeing the billing team - Revenue lost to denials that aren’t worked, claims that go out late, and A/R that ages past recovery That last item is often the largest and the least visible. A billing team that’s stretched thin may cost less on paper while quietly leaving far more uncollected. ### What outsourced billing really costs Billing companies are commonly paid in one of a few ways, such as a percentage of what they collect, a flat fee per claim, or a flat monthly fee. Each model has tradeoffs. A percentage of collections ties the billing company’s income to what the practice actually receives, while flat-fee models can be easier to budget for but don’t reward collecting more. Published pricing for full-service billing commonly runs 4 to 10 percent of collections, with per-claim fees often between $3 and $10, and the rate depends on your specialty, claim volume, average claim value, and the condition of your A/R. We break the models down with a worked example in [how much outsourced medical billing costs](/guides/how-much-does-outsourced-medical-billing-cost/). There are also costs beyond the fee. Transitions take work, the practice still needs someone to handle charge entry and front desk tasks, and a poor fit with a billing company can be as expensive as a struggling in-house team. ### The tradeoffs that matter more than price Price matters, but these questions usually decide whether an arrangement works: - Who actually works your claims, and will you be able to reach that person directly? - Will they work inside your existing EHR and practice management system, or require you to change software? - How do they handle denials and old A/R, and do they report on them? - What will you be able to see each month, such as denial rates, days in A/R, and collections by payer? - What happens to your data and access if you end the relationship? Some billing companies prefer practices that are already running smoothly, because clean practices are easier to bill for. A practice that’s behind or struggling should ask directly whether a company takes on turnaround work, since cleaning up a backlog is different from maintaining a healthy account. ### What changes when the practice is small A practice with one to three providers usually has one person doing billing, often alongside front desk or office manager duties. That creates a single point of failure. A two-week vacation or a resignation means claims don’t go out, denials don’t get worked, and follow-up stops, and the practice feels it in cash flow a month later. An outside team spreads the work across several people, so coverage is built in. Small practices also have less leverage with large billing companies and can end up as a low-priority account. Ask whether the company has a minimum monthly fee, how many practices each account manager handles, and whether a practice of your size gets a named contact. A smaller billing firm that works inside your existing software is often a better fit than a national vendor with a long client list. ### A hybrid approach It doesn’t have to be all or nothing. Some practices keep front desk tasks and charge entry in-house and outsource coding, claims, and follow-up. Others bring in outside help for a specific project, such as clearing aging A/R or reducing denials, and then decide how to handle billing long term. ### How to decide Before choosing, measure how your current billing is performing. Your clean claim rate, denial rate, days in A/R, and share of A/R over 90 days show whether the problem is capacity, process, or expertise. If the numbers are strong, keeping billing in-house may be the right call. If they’re slipping, the real cost of staying the course is the revenue that isn’t being collected, and that’s the number to compare against any outside fee. Common questions: - Is it cheaper to outsource medical billing? It depends on how well in-house billing is performing. The fair comparison includes staff, software, training, turnover, management time, and the revenue lost to unworked denials and aging A/R, not just a salary compared with a fee. - How do medical billing companies charge? Common models are a percentage of collections, a flat fee per claim, or a flat monthly fee. A percentage of collections ties the company’s income to what the practice actually receives. - What should I ask a medical billing company before hiring them? Ask who will work your claims and whether you can reach them directly, whether they work in your existing software, how they handle denials and old A/R, what they report monthly, and what happens to your data if you leave. - Should a small practice with one or two providers outsource billing? It often makes sense when billing is one person’s part-time job, because that person is a single point of failure and the revenue lost to unworked denials and aging A/R usually outweighs the fee. It makes less sense if an experienced biller is dedicated to the work, denials are tracked and appealed, and days in A/R are under 40. - What does in-house medical billing cost per year? A full-time biller costs a median salary of about $48,000 according to the Bureau of Labor Statistics, plus 25 to 30 percent for benefits and payroll taxes, plus practice management software, clearinghouse fees, training, and management time. The total commonly lands between $70,000 and $90,000 a year before counting any revenue the practice fails to collect. - Can a small practice outsource only part of its billing? Yes. Many practices keep charge entry, eligibility checks, and front desk collections in-house and outsource coding, claim submission, denial management, and insurance follow-up, or bring in outside help for a one-time cleanup of old A/R. ## How Much Does Outsourced Medical Billing Cost? URL: https://elevatemedicalresources.com/guides/how-much-does-outsourced-medical-billing-cost/ Outsourced medical billing commonly costs between 4 and 10 percent of the money the billing company collects for you, according to published pricing across the industry, with most small and mid-sized practices landing somewhere in the middle of that range. The alternatives are a flat fee per claim, often between $3 and $10, or a hybrid that combines a lower percentage with a monthly minimum. The rate depends on your specialty, how many claims you send, the average value of each claim, how much work is included, and the shape your accounts receivable is in when the company takes over. This guide explains each pricing model, what’s usually included and what isn’t, what the transition costs, and how the total compares with paying a biller in-house. ### Percentage of collections This is the most common model, and it’s the one most practices mean when they ask what billing costs. The company takes a percentage of what it collects on your behalf each month. If it collects $80,000 and the rate is 6 percent, the fee is $4,800. The rate moves with a few things: - Claim volume and average claim value. A practice that sends many high-value claims is cheaper to bill per dollar collected, so it gets a lower rate. A practice with many small claims, such as primary care or behavioral health, often pays toward the top of the range. - Specialty complexity. Surgical specialties, anesthesia, and anything with heavy prior authorization or modifier work costs more to bill correctly. - Scope. A rate that includes coding, denial appeals, patient statements, and A/R follow-up will be higher than a rate that covers claim submission alone. - The condition of your A/R. A practice that arrives with a large backlog of old claims is more work, and some companies price that cleanup separately. - Number of payers and locations. More contracts and more sites mean more rules to keep straight. The appeal of this model is that the company earns more only when you do, which keeps its incentives pointed at collecting. The thing to watch is what “collections” means in the contract. Some companies take their percentage on everything that comes in, including patient payments collected at your front desk and payments on claims your own staff worked. Ask for the percentage to apply only to money the company’s work actually brought in. ### Flat fee per claim Some companies charge a fixed amount for every claim they submit, commonly between $3 and $10 depending on the specialty and what’s included. This model is easy to budget and works well for practices with steady volume and high-value claims, because the fee doesn’t grow with the dollar amount of the claim. The weakness is the incentive. A per-claim fee is earned when the claim goes out, not when it gets paid, so the company has less reason to chase denials and old balances. If you choose this model, make sure denial management and follow-up are spelled out as included work with reporting attached. ### Hybrid and flat monthly models Hybrids pair a lower percentage of collections with a monthly minimum, so the company is protected in a slow month and the practice still benefits from the aligned incentive. Flat monthly fees, where the company charges a set amount regardless of volume, are less common and tend to suit very stable practices or practices that only want a limited scope of work. Whatever the model, the contract should state the fee, what triggers it, what it covers, and how it changes if your volume or scope changes. ### What’s usually included, and what often isn’t A full-service billing agreement commonly includes: - Claim creation, scrubbing, and submission through the clearinghouse - Payment posting from electronic and paper remittances - Denial and rejection management, including corrections and appeals - Insurance follow-up on unpaid claims - Patient statements - Monthly reporting on collections, denials, and A/R Items that are often priced separately, or not offered at all, include: - Coding from the clinical documentation, as opposed to submitting the codes your providers select - Eligibility verification and prior authorization - Credentialing and payer enrollment - A cleanup of old A/R that existed before the company started - Patient collection calls and payment plans - Practice management software licenses, clearinghouse fees, and statement postage - Custom reporting or financial management beyond the standard monthly package Two practices paying the same percentage can be getting very different amounts of work, so compare scope before comparing rates. ### Setup and transition costs Setup fees range from nothing to a few thousand dollars, depending on whether the company has to build your payer connections, configure your software, or migrate data. Ask whether the fee is waived with a contract term, and what it buys. The transition itself has a cost that doesn’t show up on an invoice. Most changeovers take 60 to 90 days to settle, and during that window someone at the practice has to answer questions, grant system access, and review the first batches of claims. Claims that were in progress when the switch happened need an owner, and some companies charge a different rate, or decline the work, on claims they didn’t create. If you’re leaving another billing company, check your current contract for notice periods and for what happens to claims that are still open when you leave. ### How it compares with an in-house biller The honest comparison puts everything on both sides of the ledger. An in-house biller costs a salary first. The Bureau of Labor Statistics reported a median of about $48,000 a year for medical records and health information specialists in May 2023, and experienced billers in higher-cost markets earn more. BLS employer cost data shows benefits and payroll taxes commonly adding 25 to 30 percent on top of wages, which brings one full-time biller to roughly $60,000 to $62,000 before anything else. Add practice management and clearinghouse fees, coding references and continuing education, the manager’s time spent reviewing A/R reports, and coverage when the biller is out or leaves, and the total for a single-biller practice commonly lands between $70,000 and $90,000 a year. Now take a practice collecting $1 million a year. At 6 percent of collections, outsourced billing costs $60,000 a year, and that fee usually covers a team rather than one person, so vacations, sick days, and turnover stop being your problem. At 4 percent it’s $40,000, and at 9 percent it’s $90,000. The two options overlap, which is why the fee alone rarely decides it. What decides it is the revenue each option collects. A single biller who is also covering the front desk tends to work the easy denials and let the rest age. MGMA has reported that as many as 65 percent of denied claims are never resubmitted, and Change Healthcare’s denials index has put initial denial rates near 10 percent of claims. For a $1 million practice, even a few points of unworked denials and aged A/R add up to more than the difference between any two fees above. The example is a hypothetical, not a result, but the arithmetic holds for most small practices. ### When outsourcing comes out ahead Outsourcing usually wins on cost when: - Billing is one person’s part-time job and that person is a single point of failure - Days in A/R are above 40 and the share of A/R over 90 days is growing - Denials are tracked loosely or not at all, and appeals are rare - Turnover keeps resetting the team’s payer knowledge - The practice is too small to justify a dedicated, experienced biller plus backup Keeping billing in-house usually wins when: - An experienced biller is dedicated to the work and not pulled to the front desk - Clean claim rate is at or above 95 percent and denials are under 5 percent - A/R is current and reports are reviewed every month - The practice has enough volume to keep two trained people busy, so coverage exists ### Questions to ask about pricing - Does the percentage apply only to money your work collects, or to everything that comes in? - Exactly which services are included at that rate, and which cost extra? - Is there a setup fee, a monthly minimum, or a contract term, and what happens if we leave early? - How are claims that are already in progress at the switch handled and priced? - Is old A/R cleanup included, and if not, how is it priced? - Who pays for the clearinghouse, the practice management software, and patient statement postage? - Do you work inside our existing system, or does the rate assume we move to yours? - What reports do we get each month, and do they show denials and A/R at the claim level? - Will you sign a Business Associate Agreement? - What happens to our data and open claims if we part ways? ### How to decide Before you compare fees, measure what your billing collects today. Your clean claim rate, denial rate, days in A/R, and the share of A/R over 90 days tell you whether the problem is cost or performance. Our guide to [outsourced vs. in-house medical billing](/guides/outsourced-vs-in-house-medical-billing/) covers the decision in full, and [in-house vs. outsourced collections](/guides/in-house-vs-outsourced-medical-collections/) looks at the follow-up side on its own. Elevate’s [medical billing and coding](/services/medical-billing-and-coding/) team works inside your existing software, and a [free Revenue Rescue Assessment](/?assess) will show where your billing stands before you decide anything. Common questions: - How much do medical billing companies charge? Most charge a percentage of what they collect, commonly between 4 and 10 percent under published pricing, with small and mid-sized practices usually in the middle of that range. Others charge a flat fee per claim, often $3 to $10, or a hybrid with a lower percentage and a monthly minimum. - Is 4 percent a good rate for medical billing? It’s at the low end of published pricing and usually applies to high-volume practices with high-value claims or a narrow scope of work. Compare what’s included before judging the rate, because a 4 percent fee that excludes denial appeals and follow-up can cost more than a 7 percent fee that includes them. - Does the percentage include patient payments? In some contracts it does. Ask for the percentage to apply only to the money the billing company’s work actually brought in, not to payments collected at your front desk or on claims your own staff worked. - Are there setup fees for outsourced medical billing? Sometimes. Setup fees range from nothing to a few thousand dollars depending on payer connections, software configuration, and data migration, and some companies waive them with a contract term. The transition itself usually takes 60 to 90 days to settle. - Is it cheaper to outsource billing or hire a biller? For a practice collecting around $1 million a year, a 6 percent fee is about $60,000, and a single in-house biller commonly costs $70,000 to $90,000 once salary, benefits, software, training, and coverage are counted. The bigger difference is usually in what each option collects, because unworked denials and aging A/R cost more than either fee. - What should an outsourced billing fee include? At minimum, claim scrubbing and submission, payment posting, denial and rejection management with appeals, insurance follow-up, patient statements, and monthly reporting. Coding, eligibility and prior authorization, credentialing, and old A/R cleanup are often priced separately, so confirm each one in writing. ## In-House vs. Outsourced Medical Collections: How to Decide URL: https://elevatemedicalresources.com/guides/in-house-vs-outsourced-medical-collections/ Unpaid claims and patient balances don’t collect themselves. Somebody has to check on every claim that hasn’t paid, call payers, work denials, send statements, and follow up with patients, week after week. For most practices, the real question isn’t whether that work needs to happen, it’s who should do it: your own staff, or an outside team that does it full time. This guide compares in-house and outsourced collections honestly, including the costs that don’t show up on a budget line, and gives you a list of questions to ask before you hand your A/R to anyone. ### What collections work actually includes When practices talk about collections, they usually mean two different streams of money: - Insurance follow-up: checking on claims that haven’t paid, correcting and resubmitting rejected claims, appealing denials, chasing underpayments, and working aged A/R before it passes timely filing limits. - Patient collections: statements, payment plans, reminder calls and texts, collecting balances at the time of service, and, as a last step, deciding whether to send an account to a collection agency. Both streams need consistency more than anything. A claim that nobody checks on for 60 days is much harder to collect than one that was followed up on day 30, and a patient balance that sits for months is less likely to be paid at all. ### What it costs to keep collections in-house The obvious cost is payroll, but the full cost of doing collections yourself is wider: - Salaries, benefits, and payroll taxes for the staff who do follow-up - Practice management software, clearinghouse fees, and statement or texting tools - Training on payer rules, appeal processes, and changing coding requirements - Coverage when someone is out sick, on vacation, or leaves, including the time it takes to hire and train a replacement - Manager time spent overseeing the work and reviewing A/R reports - The revenue that’s lost when follow-up falls behind, claims age past filing limits, or denials are written off instead of appealed The last item is the hardest to see and often the largest. In many practices, collections is one of several jobs on the same person’s desk, so it’s the first thing to slip when the front office gets busy. ### What it costs to outsource collections Outside billing and collections companies are commonly paid in one of a few ways: a percentage of what they collect, a flat fee per claim or account, or a flat monthly fee. Some charge a higher percentage for old A/R because it takes more work to recover. Each model has tradeoffs. A percentage of collections ties the vendor’s income to what your practice actually receives, which aligns incentives. Flat fees can be easier to budget, but they don’t reward the vendor for collecting more. Whatever the model, ask exactly what the fee covers, whether there are setup or minimum fees, and what happens to the fee on accounts that were already in progress when you signed. There are costs beyond the fee, too. A transition takes staff time, someone at the practice still needs to handle charge entry, eligibility, and front desk collections, and a poor fit with a vendor can cost as much as a struggling in-house team. ### Control, visibility, and the patient experience Keeping collections in-house gives you direct control over how your patients are contacted, what gets written off, and how quickly problems are escalated. That control only helps if someone has the time and training to use it. Outsourcing trades some of that direct control for capacity and specialization. The trade works well when the vendor gives you clear reporting and access. It works poorly when you can’t see what’s happening to your claims or can’t reach the people doing the work. Patient collections deserve special care either way. Patients remember how they were treated about a bill, and a harsh or confusing collections experience can cost you a patient relationship that’s worth far more than the balance. If an outside team contacts your patients, you should know exactly what they say, how often they reach out, and in whose name. ### Compliance you need to keep in mind Collections touch protected health information and consumer debt, so a few rules apply no matter who does the work. This is general information, not legal advice, so confirm the specifics with your own advisors. - HIPAA: any outside company that handles your patients’ information needs a signed Business Associate Agreement, and it should be able to explain how it protects that data. - Fair debt collection rules: third-party debt collectors are covered by the federal Fair Debt Collection Practices Act, and many states have their own rules. How those rules apply can depend on whether a vendor collects in your practice’s name or its own, so ask. - Payer contracts and timely filing: every payer has its own filing and appeal deadlines, and missing them usually means the money is gone for good. - Patient billing notices: some states and payer arrangements have specific requirements for statements and balance billing, so your process should account for them. ### When each approach makes sense Keeping collections in-house tends to work when: - You have experienced staff whose main job is follow-up, not a front desk role with collections added on - Your A/R is current, with few claims aging past 90 days - Denials are tracked, worked, and appealed consistently - You get clear reports and review them regularly Outsourcing tends to make sense when: - Follow-up keeps falling behind because staff are pulled in other directions - Aged A/R is growing, or claims are passing filing limits - Turnover keeps resetting your team’s experience - You don’t have reliable visibility into what’s owed, by whom, and why Many practices land in between: they keep front desk and patient collections in-house and bring in outside help for insurance follow-up, denials, or a one-time cleanup of old A/R. That approach can fix the backlog without changing how patients experience the practice. ### Questions to ask a collections or billing company - Who will actually work our claims, and can we reach them directly? - Do you work inside our existing practice management system, or do we need to switch? - How do you handle denials and appeals, and how quickly are they worked? - How do you approach old A/R, and is it priced differently? - If you contact our patients, whose name do you use, and can we approve the scripts and statements? - What will you report to us each month, and can we see claim-level detail? - Will you sign a Business Associate Agreement, and how do you protect our data? - How are you paid, what’s included, and are there setup fees or minimums? - What happens to our data and open accounts if we part ways? ### How to decide Start with the facts about your current setup: how much A/R is over 90 days, how many claims are denied and how many of those get appealed, and how much is written off each month. Those numbers usually make the right answer clearer than any fee comparison. If you’d like help finding them, Elevate’s [patient collections and insurance follow-up](/services/patient-collections-and-insurance-follow-up/) team works inside your existing systems, and a [free Revenue Rescue Assessment](/?assess) will show where your collections stand before you decide anything. You can also read our comparison of [outsourced vs. in-house medical billing](/guides/outsourced-vs-in-house-medical-billing/) for the broader billing decision. Common questions: - Is it better to outsource medical collections or keep them in-house? It depends on how well your current process is working. If experienced staff focus on follow-up, A/R is current, and denials are appealed consistently, in-house can work well. If follow-up keeps falling behind or aged A/R is growing, outside help often makes sense. - How do medical collections companies charge? Common models are a percentage of what they collect, a flat fee per claim or account, or a flat monthly fee. Some charge a higher percentage for old A/R. Ask exactly what the fee covers and whether there are setup fees or minimums. - Does a collections vendor need a Business Associate Agreement? Yes. Any outside company that handles your patients’ protected health information should sign a Business Associate Agreement under HIPAA before it starts work. - Can we outsource insurance follow-up but keep patient collections in-house? Yes. Many practices keep front desk and patient collections in-house and bring in outside help for insurance follow-up, denials, or a one-time cleanup of old A/R. - What should we look at before deciding? Look at how much of your A/R is over 90 days, how many claims are denied and how many of those are appealed, and how much is written off each month. Those numbers usually point to the right answer. ## How to Do a Revenue Cycle Audit for a Medical Practice, and What It Usually Finds URL: https://elevatemedicalresources.com/guides/what-is-a-revenue-cycle-audit/ To do a revenue cycle audit for a medical practice, pull 12 months of claims, payments, and scheduling data, then follow the money through nine stages: registration, eligibility and authorization, charge capture, coding, claim submission, denials, payment posting, A/R follow-up, and patient collections. At each stage you compare what happened with a benchmark. Commonly cited targets are a clean claim rate of 95 percent or better, an initial denial rate at or under the 5 percent MGMA uses for better-performing practices, days in A/R under 40, and A/R older than 120 days held to a small share of the total. Then you put a dollar value on every gap, separate what’s still recoverable from what’s already lost, and rank the fixes by what they’re worth. This guide covers each step, what audits commonly find, and what the finished report should contain. A revenue cycle audit is a structured review of how a practice gets paid, from the moment a patient is scheduled to the moment the last dollar is collected. Its purpose is to find where revenue is being lost or delayed and to put a number on it, so the practice knows which problems are worth fixing first. It’s different from a coding compliance audit, which focuses on whether services were coded correctly for regulatory purposes. A revenue cycle audit looks at coding too, but its main question is financial: is the practice collecting everything it has earned, and how quickly? ### What an audit reviews A thorough audit usually follows the claim through every stage: - Scheduling and registration, including whether patient demographics and insurance details are captured correctly - Eligibility verification and prior authorization, and whether they happen before the visit - Charge capture, comparing what was scheduled and documented with what was billed - Coding accuracy, including modifiers and whether diagnosis codes support the services billed - Claim submission, including rejection rates at the clearinghouse and how quickly claims go out - Denials, broken down by payer, reason, and provider - Payment posting, including whether payments match contracted rates - A/R follow-up, including aging, days in A/R, and how old claims are being worked - Patient collections, including statements and balances owed after insurance ### How to do the audit, step by step - Gather the data. You’ll need 12 months of claims and remittances from your practice management system, the clearinghouse rejection reports, the A/R aging report by payer, the appointment schedule, and your payer fee schedules. If any of these are hard to produce, note that as a finding in itself. - Reconcile visits with charges. Compare the appointment schedule and signed encounters with the claims that were actually created. Every documented visit without a claim is unbilled revenue, and this step usually takes the longest. - Check claim quality. Measure the clearinghouse rejection rate and the clean claim rate, meaning claims paid on first submission. A commonly cited target is 95 percent clean. - Analyze denials. Group initial denials by payer, reason code, provider, and location, and compare the rate with MGMA’s 5 percent benchmark for better-performing practices. Count how many denials were corrected, appealed, or written off, and how many simply expired. - Measure the A/R. Calculate days in A/R by dividing total A/R by average daily charges, and compare it with the under-40 benchmark. Then look at the share of A/R older than 90 and 120 days, by payer. - Test payments against contracts. Take your 20 highest-volume codes and compare what each payer actually paid with the contracted rate. Underpayments that appear consistently are a contract or posting problem, not a one-off. - Review patient balances. Check what’s collected at the time of service, how statements go out, and how much patient A/R is older than 90 days. - Value and rank every finding. Estimate the dollars behind each gap, mark which are still recoverable within payer deadlines, and order the fixes by what they’re worth and how fast they can be done. ### What audits commonly uncover Every practice is different, but some findings come up again and again: - Encounters that were documented but never billed - Coding errors that lead to denials or to services being paid at a lower rate than they should be - Denials that were never reworked and are approaching or past their deadlines - Large balances in the over-90 and over-120 day A/R buckets - Payments below contracted rates that no one flagged - Eligibility and authorization gaps that cause preventable denials - Workflows that depend on one person, so work stops when that person is out In practices that have been struggling for a while, it’s common for an audit to find several of these at once, with a meaningful amount of recoverable revenue tied up in old claims. ### What you should get at the end A useful audit ends with more than a list of problems. It should put an estimated dollar value on each issue, separate what can still be recovered from what’s already lost, and lay out a prioritized plan. The fixes that recover the most money or stop the largest ongoing leak should come first. ### How often to do one Many practices benefit from a full review once a year, with key numbers like denial rate and days in A/R tracked every month in between. An audit is especially worth doing when cash flow drops without an obvious reason, after a change in billing staff or software, or before deciding whether to outsource billing. ### Seeing an audit in practice Elevate has published two anonymized white papers that walk through real audits, one for an urgent care practice with $1.45M in aging A/R and one for a multi-location gastroenterology practice. They show what the audits found, what was driving the losses, and the plan to recover the revenue. Common questions: - What is a revenue cycle audit? It’s a structured review of how a practice gets paid, from scheduling and registration through coding, claims, denials, payment posting, and collections. Its goal is to find where revenue is being lost or delayed and estimate how much. - How is a revenue cycle audit different from a coding audit? A coding audit focuses on whether services were coded correctly for compliance. A revenue cycle audit includes coding but looks at the whole payment process, asking whether the practice is collecting everything it has earned and how quickly. - How often should a medical practice audit its revenue cycle? Many practices benefit from a full review once a year, with denial rate, days in A/R, and similar numbers tracked monthly. An audit is especially worthwhile when cash flow drops unexpectedly or after staff or software changes. - What data do I need for a revenue cycle audit? Twelve months of claims and remittances from your practice management system, clearinghouse rejection reports, the A/R aging report by payer, the appointment schedule, signed encounter records, and your payer fee schedules. If any of those are hard to pull, that’s a finding on its own. - Can I do a revenue cycle audit myself? A practice can run the core checks itself if someone has the time and report access: reconcile visits with charges, measure clean claim and denial rates, calculate days in A/R, and test payments against contracts. Outside auditors add independence, payer-specific knowledge, and the time to work through a year of claims line by line. - How long does a revenue cycle audit take? It depends on practice size and how quickly reports can be pulled. A focused audit of a single-specialty practice is usually measured in weeks rather than months, with the visit-to-charge reconciliation taking the largest share of the time. ## Why an Ambulatory Surgery Center Can Be Busy and Still Lose Money URL: https://elevatemedicalresources.com/guides/why-is-my-surgery-center-losing-money/ Ambulatory surgery centers can look healthy from the outside. The rooms are booked, surgeons are bringing in cases, and volume is steady or growing. Yet many ASC owners find that margins are thinner than they expected, or that the center is losing ground even as it gets busier. The reason is that an ASC’s profitability depends on the details of every case, including what it costs to perform, how it’s coded, what each payer pays for it, and how quickly that payment arrives. Volume can hide problems in all of those areas. ### Not every case is profitable Different procedures carry very different costs and very different reimbursement. A case with an expensive implant or long room time can lose money under one payer’s contract and make money under another. Without case-level costing, meaning a clear view of what each procedure costs in staff time, supplies, implants, and room time compared with what it’s paid, it’s hard to know which cases are carrying the center and which are holding it back. ### Payer contracts that don’t fit the case mix ASC contracts often have terms that matter a great deal for specific procedures, such as whether high-cost implants are paid separately, how multiple procedures in the same session are reimbursed, and which fee schedule applies. Medicare and many commercial payers reduce payment for additional procedures performed in the same session, so the way cases are scheduled and coded affects what the center is paid. A contract that made sense years ago may not match the center’s current case mix. Reviewing contracts against actual cases often shows where the center is underpaid or where it should push for better terms. ### Supply and implant costs that creep up Supplies and implants are among the largest costs in most surgery centers. Prices rise, preference cards drift, and items get opened and not used. When supply costs aren’t tracked by case and by surgeon, they can quietly erase the margin on procedures that should be profitable. ### Staffing and utilization Staffing costs depend on how efficiently rooms are used. Late starts, long turnovers, gaps in block time, and cases that run over all mean paying staff for time that doesn’t produce revenue. Utilization data shows whether the center is getting full value from its rooms and staff. ### Billing problems that hit harder in an ASC The general billing issues that affect any practice, such as denials, missing authorizations, coding errors, and slow A/R, tend to cost more in a surgery center because each claim is larger. A single denied case can represent a significant amount of revenue, and authorization problems are especially costly when they’re discovered after the procedure. ### How owners can see what’s really happening The centers that stay profitable look at their numbers by case, by procedure, by payer, and by surgeon, not just in total. Useful questions to answer include: - What does each of our most common procedures cost, and what does each payer pay for it? - Which payer contracts underpay for our current case mix? - How are supply and implant costs trending by procedure and surgeon? - How well are our rooms and block time being used? - What is our denial rate and days in A/R, and which payers are slowest? Answering those questions takes financial and reimbursement analysis that goes beyond standard billing. It’s the kind of work that benefits from someone who has managed a surgery center and understands how clinical activity turns into financial performance. Common questions: - Why is my surgery center losing money if case volume is strong? Volume can hide problems with case costs, payer contracts, supply and implant spending, room utilization, and billing. Some procedures may lose money under certain contracts, which only shows up in case-level analysis. - How do payer contracts affect ASC profitability? Terms such as whether implants are paid separately, how multiple procedures are reimbursed, and which fee schedule applies can make the same procedure profitable under one payer and unprofitable under another. - What financial reports should an ASC owner review? Case and procedure profitability, payer mix and reimbursement, supply and implant costs by procedure and surgeon, room and block utilization, denial rate, and days in A/R by payer.